Shenzhen Wejoin Mechanical & Electrical Co.
A Professional Security Products Supplier! Your Best Security Partner!
Add to Cart
1800KG Heavy duty sliding gate motor manufacturers with gear rack
Function and Features
1. Integrated structure of the mechanic and electron. No need to install other controllers.
2. Electronic soft-start.
3. Automatically restraining when meets obstacle.
4. Crash proof and automatically restraining socket.
5. Crash proof (photocell).
6. Alarm light socket.
7. Line control and Remote control are optional.
8. Intelligent automatic heating function.
9. Automatically increase the temperature when the temperature is below 0 degree.
Motor Data
Model: KMP202
Voltage: 220V±10%, 110V±10%
Frequency: 50/60Hz
Current: 2.7A, 5.8A
Motor voltage: AC 220V/110V
Capacitor: (220V) 20µF, 60µF+14µF
Power: 350W
Torque: 35nm
Motor number: M=4
Motor speed: 1350rpm, 1620rpm
Gear speed: 58.8rpm, 70.2rpm
Travel speed: 11m/min, 13.2m/min
Working temperature: -40°c~ 55°c
Overload protection temperature: 130
Relative humidity: ≤90%
Motor making technique: die casting aluminum alloy
Manual Release: yes
Remote distance: >30m
Product weight, approx: 10.19kg, 10.25kg
Max, weight of gate: 1800kg
Electronic Data
| Model | KMP202 |
| Soft start | YES |
| Stop on obstacle (sensitivity adjustable) | YES |
| Auto warming-up (at freezing temperature) | YES |
| Remote control | 418MHz (50m, approx) |
| Wire control | Available |
| Auto closing | YES |
| Vehicle loop detector socket | YES |
| Photocell socket | YES |
| Alarm light socket | YES |
Motor base and it's installation
1. Motor base installation: set the installation position of the base tray according to the size of the motor and the height of the installation position of the gear rack. Then Embed the bolts in advanced or use the expansion bolts to embed the base into the cement foundation.
2. If the gear rack has already been installed, fix the motor to th base and turn the clutch with the clutch key to the off position, then make the gear of the motor suit right to the gear rack, then the position of the base can be set. Take off the motor and fix the base.
