Shenzhen Wejoin Mechanical & Electrical Co.
A Professional Security Products Supplier! Your Best Security Partner!
Add to Cart
58.5rpm/70.2rpm Gear Speed Sliding Gate Opener Motor No Need Additional Control
Maintain
I. The antifreeze lubricant oil has been applied to the sliding gate operator. There is no need to add the oil before using.
2. After using the sliding gate operator for one month, please check the antifreeze lubricant oil Ifit needs to be changed, please change the oil with the same type. Then check the oil every year Ifthe oil turns bad, change the oil with the same type.
3. After using the gate operator for some time, please check if any parts are loose. If they turn loose, please tighten them.
Troubleshooting
I. The motor runs but the sliding gate operator doesn't work.
A: Check whether the clutch is closed.
2 The power indicator light doesn't flash and the key doesn't react.
A: Check whether power is connected right.
B: Check whether the fusel is burned, it yes, please exchange it.
3 The opening and closing limit can not work.
A: Check whether the limit adjustment switch is installed right.
B: Check whether the limit iron is installed right. Adjust the position of the limit iron.
4 Crash proof is not effective.
A Check whether the connection of crash proof is correct.
B: Check whether the photocell is installed right.
C: Check whether the connection of the wire of the loop detector is right.
5 When the gate just close up, it turns to open.
A: Check whether the voltage is normal.
B: If the crash proof equipment is installed, please check whether it works well.
6 The remote control doesn't work
A: Check whether the battery is low. If yes, change it.
B Check whether the code of the remote control is the same with the code of the control panel.
