Shenzhen Wejoin Mechanical & Electrical Co.
A Professional Security Products Supplier! Your Best Security Partner!
Add to Cart
ac control board sliding door motor with gear rack and pinion
Overview
This is a conventional sliding gate operator, with brand-new design, brand-new clutch structure, fashionable exterior design and brand-new control technique, making the motor more humanistic.
Motor Data
| Model | WJKMP202 | |
| Voltage | 220V±10% | 110V±10% |
| Frequency | 50HZ | 60HZ |
| Current | 2.7A | 5.8A |
| Motor voltage | AC220V / 110V | |
| Capacitor | 20μf | 60μf +14μf |
| Output Power | 350W | |
| Absorbed power | 594W | 638W |
| Torque | 35nm | |
| Mode number | M=4 | |
Electronic Data
Soft start: YES
Stop on obstacle (sensitivity adjustable): YES
Auto warming-up (at freezing temperature): YES
Remote control: 418MHz (50m, approx)
Wire control: Available
Auto closing: YES
Vehicle loop detector socket: YES
Photocell socket: YES
Alarm light socket: YES
Notice
1) The working voltage is 10% of the rated voltage, use power regulator if in area of volatile supply voltage.
2) The gear modulus: M=4 Gear scalar: Z=15. Please use the correspondent rack.
3) The gate should be balanceable and level. So the gear and rack can fix well.
4) The gap between gears should be fi gate operator can move smoothly.
5) The rail should be embedded right. The wheel of the gate should be right and installed well. These are key points for the gate running well. Adjust the bolts which can make the gate operator up or down to make the gear fit the rack well. Make sure that the gate can be moved by an adult when the clutch is opened.
6) Make sure the running direction of the gate operator. The limit iron should be fixed at the right position, otherwise limit doesn't work and then the motor will be stocked and out of control.
Service Item
1. One year maintenance services provided free of charge
2. Life-long repairing with charge offered11.
3. Technical support
