Shenzhen Wejoin Mechanical & Electrical Co.
A Professional Security Products Supplier! Your Best Security Partner!
Add to Cart
Straight arm vehicle access control barrier gate
Vehicle Barrier Gate Quick Detail:
The technology is applied to drive motor of electric vehicle and spindle motor of CNC lathe.
# Strong moment, high precision control, low temperature rise
# Standard traffic lights
# 3-5S speed adjustable
# yellow-green, dark grey + light grey and yellow-white color optional
Vehicle Barrier Gate Functions & Features
1 . No clutch design : open the barrier gate by manual hand wheel when power of.
2 . No limit switch design : the motor can detect the boom position automatically.
3 . Bi-direction boom holder design : left- installation and right-installation can be exchanged easily and quickly .
4 . Self-detect after power-on , open / close speed is adjustable .
5 . With auto-reversing on obstruction function .
6 . Infrared photocell interface and Loop detector interface is available .
7 . Built-in delay auto-closing function ,coordinated with counting function .
8 . With auto-aging test function .
9 . NO / NC wire control signal input are optional.
Vehicle Barrier Gate Technical Data
| Model | WJDZE (speed 3~5s adjustable) | ||||||
| Running Speed | 3S | 4S | 5S | 5S | 5S | 5S | 5S |
| Boom Type | Straight | Straight | Straight | 90° Folding | 180° Folding | 2 Fence | 3 Fence |
| Max Boom Length | 4.5M | 5M | 6M | 5M | 4M | 4.5M | 4M |
| Input Voltage | AC220V±10%, AC110V±10% | ||||||
| Frequency | 50/60HZ | ||||||
| Motor Voltage | DC310V | ||||||
| Enclosure Rating | IP54 | ||||||
| Working Temperature | -35°C ~ +85°C | ||||||
| MTBF | 3 million times | ||||||
| Traffic Flow Appication | 24 hours uninterrupted operation | ||||||
| Max Motor Power | 120W | ||||||
| Max Motor Speed | 24r/min | ||||||
| Max Torque | 240N.m | ||||||
Parking Barrier Common Malfunctions and Solutions
1. When power-on, press the "UP" or "DOWN" button, there is a reaction on the boom.
1.1. Check up the power supply and the fuse.
1.2. Check if the remote controller matches the radio receiver; or check-up the battery inside and then change it if it lacks power.
1.3. Check whether there is co-channel interference, and press the buttons on the control, board to check if can work.
1.4. Checkup if the external protection circuit is failing or in protection status. Check up the condition of photocell and loop detector are lighting.
