Shenzhen Wejoin Mechanical & Electrical Co.
A Professional Security Products Supplier! Your Best Security Partner!
Add to Cart
Versatile Car Park Barrier Gate for Easy Management of Vehicle Flow in Parking Lots and Exits
Automatic Barrier Gate Brief Introduction
The product consists of five parts: the barrier cover, the cabinet, the transmission mechanism, the control panel, and the barrier arm. It comes in left - hand and right - hand versions and is applied to parking lot access control systems. The product is available in three types: straight - arm barrier gate, folding - arm barrier gate, and fence barrier gate.
Boom Barrier Basic Features
1. Driven by a motor and equipped with a linkage transmission mechanism and a balance spring, it operates stably and reliably. The motor lifespan exceeds 2.5 million times, and the spring lifespan reaches 500,000 times.
2. All models are standard with an obstacle - sensing rebound function. When the barrier arm encounters resistance during the lowering process, it will automatically rebound.
3. It supports external connection of radar, loop detector, and infrared anti - collision functions. With a built - in DC 12V power output, it can supply power to external radar devices.
| Model | WJDZE-BL (speed 1.5~6s adjustable) | |||||||
| Running Speed | 1.5s | 3s | 4s | 5/6s | 6s | 6s | 6s | 6s |
| Boom-Type | Straight | Straight | Straight | Straight | 90° Folding | 180° Folding | 2 Fence | 3 Fence |
| Max Boom Length | 3m | 4.5m | 5m | 6m | 5m | 4m | 4.5m | 4m |
| Input Voltage | AC100~264V | |||||||
| Frequency | 50/60HZ | |||||||
| Motor Voltage | DC24V | |||||||
| Enclosure Rating | Ip54 | |||||||
| Working Temperature | -35℃~ + 70℃ | |||||||
| MTBF | 3,000,000 times | |||||||
| Max Motor Power | 180W | |||||||
| Max Motor Speed | 24r/min | |||||||
Fence Boom Installation
Step 1. Fix the boom fixing plate on boom with 2pcs of M12*70mm hexagon screw.
Step 2. Hold the fixing plate by hand, then lift up the boom vertically and install it on the boom holder. And then install the flat washer, spring washer, and M12 nut on the screw in turn, and fix the screw with a wrench.
Step 3. Fix the U-connecting unit to the cone axis on barrier with screw.
Step 4. Fix the bottom fence to the U-connecting unit, then release the 2pcs screw of the unit and adjust them to make the fence be perpendicular to the ground.
